Portable Battery Powered Weed Cutting Machine For Small Scale Farming

Authors

  • Shubhlakshmi Tiwari  Professor and Head, Department of Civil Engineering, Chouksey Engineering College, Bilaspur,
  • Sharda Pratap Shrivas Assistant Professor, Department of Electronics and Telecommunication Engineering, LCIT Bilaspur
  • Rahul Gedam Assistant Professor, Department of Electronics and Telecommunication Engineering, LCIT Bilaspur
  • Devesh Shrivastava Assistant Professor, Department of Mechanical Engineering, Bhilai Institute of Technology, Durg

DOI:

https://doi.org/10.53555/jaz.v42i02.5008

Keywords:

Weed cutter, Farm equipment, Agriculture, Portable machine

Abstract

Weed growth is a huge challenge for farmers; it can usually be controlled with herbicides, but it is extremely hazardous to produce. This study proposes a chemical reaction-free veggie portable type weed cutting machine. This study looks into weed cutting machines and builds a prototype for small-scale production. The cutting equipment, which is usually rotating in motion, is used to cut along roadways, around plants, and along movement by hands. The motor in this portable power weed cutter is powered by a 12 volt battery.

Downloads

Download data is not yet available.

References

1. Amrutesh P, Sagar B, Venu B., (2014).Solar grass cutter with linear blades by using Scotch yoke mechanism. International Journal of Engineering Research and Applications, 4(9), pp. 10-21.

2. Akene A., Oghenekohwo A. P. (2020). Designand fabrication of a solar powered lawn mower with Adjustable wheels. International Journal of Engineering Research & Technology (IJERT), 9(05) pp. 17-23.

3. Baingane T, Nagrale S, Gumgaonkar S, Langade G, Ramteke s, Dhumal V.M., (2018). Review on fully automated solar grass cutter. International Research Journal of Engineering and Technology (IRJET),5(2) pp.135-186.

4. More A D, More S N, Shetty V V, Patil S V., (2017). Worked on the “A Portable and Automatic Weed Cutter Device.” Presented in the journal “Journal of Electrical and Electronics Engineering (IOSR-JEEE ), pp. 14-17, ISSN: 2320-3331.

5. Magar A.P., Abut M.D. Adagate P.V., Bastewad T.B., (2010). “Performance evaluation of grasscutter.” “International journal of agricultural Engineering, 3(1), pp. 153-155.

6. Palve S V, Panchal K, Chipkar R, Patil A, Sonwane G L., (2018).“Solar Powered Automated Grass Cutter Machine, International Research Journal of Engineering and Technology, 5(4), pp. 2318-2321.

Downloads

Published

2021-08-20

Similar Articles

<< < 27 28 29 30 31 32 33 34 35 36 > >> 

You may also start an advanced similarity search for this article.